Download User Manual

User Manual
Remove In-between Frame buttons
The first icon allows you to remove the active in-between frame from the cel
sequence. The second allows you to remove all in-between frames within a pair of key
frames. This affects all the layers in the same cel.
Active Layer Indicator
Shows the current selected layer.
In-between Timing Lock
When enabled, the active in-between frame will be prevented from any changes or
updating due to timing adjustments in the Timing Panel. However, you will still be
able to manually adjust the strokes of the locked frame directly on the canvas.
Update All Cels Mode
When enabled, all cels are affected by the timing adjustments. However, this only
applies to cels which have the same number of frames and frame type.
Generate In-betweens button
When clicked, it will generate in-between frames based on the settings in the Inbetween Timing Bar.
Apply Timing Preset button
When clicked, any prior adjustments to the In-between Timing Bar will be cleared and
the markers will be moved based on the Timing Presets. However, this does not alter
the actual in-between frames. The frames will only be changed to the new timing if
the Generate In-betweens button is clicked again, or if the Auto Update Mode is
enabled.
132 | P a g e