Download Manual - KeyTalk

Figure 13: Setting your applicable NTP server(s)
Possible problems
Please make sure the firewall rules allow connection of NTP services (UDP123). Also keep
in mind that NTP will only slowly correct the time settings. This is standard NTP behavior
and to avoid a delay, manually set the time before enabling NTP. Manually setting the time
cannot be done after enabling NTP.
Also see section 14 ‘Date/time & NTP settings’. There are two menu items to configure the
time, but both function identically. One menu item is located in the ‘Network
configuration’, the other in ‘Device configuration’. Both direct you to the same function.
5.9.
Step 9: Save the current configuration
In the main menu select the ‘DEVICE’ tab and select ‘Save & Reset Configuration”.
Select “SAVE” to save the System Configuration.
Figure 14: Saving current system configuration
20