1
Download Océ 7055/7056
Transcript
If the paper jam can not be cleared by opening the copy feed table than open the fusing section by: 1 Switch off the copier. 2 Unscrew the knurled nut at the left hand side of the machine and open the cover (see figure 28). [28] Opening the left cover at the rear of the machine 3 Lift the green handle and open the fuser unit ( see figure 28 and 29 on page 43 ). Caution: If the copier has been used recently, the fuser may still be hot. 24 75 [29] Opening the fuser unit Solving problems 43
