Download C 4fdm 4fdm

Using Your Optical DVI Extension Cable
3.2 Achieving best performance
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noiselevels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances and position your
Kramer C-4FDM away from moisture, excessive sunlight and dust
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provided with this unit1.
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
Since your C-4FDM Optical DVI Extension Cable is an active electronic
device (and not just an ordinary cable) its future removal or replacement may
be necessary. Accordingly, we advise against installing it permanently as part
of an installation. When a permanent installation is required, alternative
detachable products—such as the Kramer 610T/R, 621T/R and 622T/R—are
available.
4
Using Your Optical DVI Extension Cable
This section describes how to:
Capture the EDID of the display device (see section 4.1)
Install the Optical DVI Extension Cable (see section 4.2)
Avoid pitfalls when using it (see section 4.3)
1 For example, part number 99-9090510 or 99-9090512
3