Download fulltext - DiVA Portal
Transcript
NTNU Norwegian University of Science and Technology Department of Marine Technology Preface This report represents the work done for the Master Thesis in the Discipline of Marine Hydrodynamics Engineering at NTNU, Trondheim. This thesis has been carried out individually in the spring of 2013. The objective of this thesis can be divided into two parts. Firstly literatures study of the theory, components and procedures concerning emergency disconnection of a drilling riser. Secondly apply this knowledge to model and simulate the emergency disconnection in the software SIMA RIFLEX developed by NTNU/MARINTEK. Unfortunately I made an error in the mud discharge problem of the thesis. This error was discovered to late to and no time was available to re-‐run all the analysis. The friction forces are added in positive z-‐direction of the riser, and not in negative z direction, as they should have been. I would like to thank my supervisor Professor Carl M. Larsen for giving me this interesting thesis, which I had little prior knowledge on. For the support and hand out of data. I would also like to thank Ronny Sten and Aker Solutions for providing me with a specific riser system, and learning through his PhD thesis. Dolphin Drilling for giving me an insight in their procedures. Guttorm Grytøyr for his previous work. Andreas Amundsen for troubleshooting with SIMA RIFLEX. And at last thanks to the guys at the office for motivation and support. Institute for Marine Technology, Trondheim June, 2013 _______________________ Arild Grønevik III