Download digital panel meter n30p type user`s manual

Kind of input value type, which the
alarm has to react on.
U – RMS voltage
I – RMS current
P – active power
q – reactive power
S – apparent power
PF – active power factor
tG – ratio of reactive power to active
power
FI – phase shift
FrEq - frequency
EPPoS – active energy input
EPnEG – active energy output
EqPoS – reactive energy input
EqnEG – reactive energy output
PAv – 15 minutes’ mean active power
UAv – 10 minutes’ mean voltage
FAv – 10 seconds’ mean frequency.
Lower alarm threshold.
-19999M ... 99999M
Upper alarm threshold.
-19999M ... 99999M
tYP 1
tYP 2
tYP 3
tYP 4
Alarm type. The fig. 9. presents a
graphic display of alarm types.
n-on – normal (transition from 0 to 1),
n-oFF – normal (transition from 1 to 0),
on - switched on,
oFF – switched off,
H-on – manually switched on; till the
time of alarm type change, the alarm
output remains switched on for good.
H-oFF – Manually switched off; till the
time of alarm type change, the alarm
output remains switched off for good.
dLY_1
dLY_2
dLY_3
dLY_4
Delay of alarm switching.
0...900 seconds
P_A1
P_A2
P_A3
P_A4
PrL 1
PrL 2
PrL 3
PrL 4
PrH 1
PrH 2
PrH 3
PrH 4
20