Download Andover ContinuumTM Product Catalogue

Andover Continuum
Temperature Control Interactive Sensors
Smart Sensor
The TAC Smart Sensor combines an attractive display with a room temperature sensor to provide
users with a cost effective way to view or modify local terminal unit operation. It is designed for
use with I2 controllers and can also accomplish many local control and monitoring tasks.
The standard sensor provides a two-character LED display and a 6 button programmable keypad
that enables operators and occupants to change setpoints, monitor occupancy status and turn
equipment on and off. An enhanced version is also available with a 4-digit custom LCD that
provides the following icons: %, Setpoint, Cool, Heat, Fan, OA, and SP.
The function keys can be custom programmed to perform a wide variety of functions, including
switching a specific zone to occupied mode, signalling an alarm condition, adjusting the amount
of override time, arming or disarming a security system, and enforcing password security.
Programming the display and function keys is done with TAC’s Plain English programming
language. Both versions of the Smart Sensor provide a connection for the RoamIO2.
Operating Range: Wire Specifications:
Slider Range:
LED: Accuracy:
Dimensions:
0°C to +40°C 10-95% RH (non-condensing)
0.2, 0.3, 0.5 or 0.8mm 2, 3 conductor, unshielded wire
200 to 10,200 ohms, +/- 0.2%
0-5VDC @ 7mA
+/-2°C for a minimum of 5 years
115mm(H) x 89mm(W) x 27mm(D)
Smart Sensor with LED display and TAC logo
TTS-SD-LED-1
Smart Sensor with LCD display and TAC logo
TTS-SD-LCD-1
Smart Sensor with LED display, no logo
TTS-SD-LED-B-1
Smart Sensor with LCD display, no logo
TTS-SD-LCD-B-1
Buffer Board for Smart Sensor LED and LCD
TTS-SD-INFBUF
Field Devices-3