Download Control system EnergyLogic Wireless control Touchline

User Manual Roth EnergyLogic Touchline/Wireless
Parameter descriptions
8
Parameter descriptions
The menu is divided in a user menu and a service menu. The user menu is
freely accessible. The service menu can only be entered through a service
code.
NOTE
8.1
Parameters can only be set by a wireless room thermostat at the same
time. Once an attempt is made to set parameters via another room
thermostat at the same time, the display shows the following symbol .
Parameter overview
User menu
Parameter
Description
P-01
Set display in stand-by-mode: actual value or time.
P-02
Set setpoint for the minimal floor temperature.
(only for versions with integrated IR-sensor)
P-03
Set upper and lower limits for room temperature setpoint.
P-04
Change time programs.
P-05
Reset time programs to factory settings.
P-06
Set display for stand-by-mode. (max. battery saving mode)
P-07
Activate or deactivate sound of sensor button.
P-08
Show ID-number of wireless room thermostat
P-09
Show ID-number of wireless connection module
Parameter
Description
P-SE
Access only with service code, factory settings "1234"
P-21
Show software-version of wireless room thermostat
P-22
Show software-version of wireless connection module
P-23
Show actual status of wireless connection module and I/OBox
P-24
Reset parameter to factory settings.
Service menu
P-20
General parameters
P10009989 A
65