1
Download 6102 Scope multimeter
Transcript
SAFETY AND WARNINGS The following safety precautions apply to both operating and maintenance personnel and must be observed during all phases of operation, service, and repair of this instrument. Before applying power, follow the installation instructions and become familiar with the operating instructions for this instrument. Digital Storage USB and design of IEC1010 with wavelet table 1 - safety norms, over-voltage electric measurement category III - 1000V CAT, Pollution protection level: 1. Caution: The rules listed below should be carefully followed for safe operation. 1. NEVER apply voltage or current to the meter that exceeds the specified maximum for the function selected. Function V DC V AC mA AC/ DC A AC/ DC Diode Capacitance Input Jacks V/，COM V/，COM 400mA，COM 20A，COM V/，COM V/，COM V/，COM Maximum Input 1000Vp, within 10 seconds 700V AC RMS, within 10 seconds 500mA DC/AC RMS, Fused 20A DC/AC RMS, within 30 seconds with a 15 minutes cool down period 250V DC + AC peak, within 10 seconds 250V DC + AC peak, within 10 seconds 250V DC + AC peak, within 10 seconds
