Download User Manual

CS50 series withstanding voltage& insulation manual
2.
Changsheng Instrument
Back panel instruction (CS5051series)
2.1 Power socket/fuse holder
Pull out power supply before replacing the fuse
2.2 GND terminal
Make sure the instrument a good ground.
2.3 PLC interface
Remote grouding terminal is accompanied by in the back of tester, which can be
connected to the remote controller to process operation. And this terminal is standard
9PIN D terminal blocks, which has the following signals, reset signal, testing signal,
qualified test signal ,and failed test signal, signal in the process of testing
Page 21
of
35