Download Mooney Viscometer User Guide

Calibration details
Calibration Number
Calibration Type
Operator
Calibration date
Motor on/off
Standard Value
This is the calibration number of the calibration. It is allotted automatically. In the above
screen this number is 2. You cannot change this number.
This is type of the calibration. Two type of calibration can be conducted namely Standard
Rubber and Dead Weight.
Name of the operator
Date of calibration
Turns motor on/off automatically
Standard value
Result (Dead Weight)
Type the Standard value expected for dead weight. After conducting the calibration the software will calculate Offset
value and Calibration constant.
Result (Standard Rubber)
Standard Value (Upper): Type the Lower and Upper values for Mooney values.
(Lower)
Preheat Time:
Test Temperature
Type the time for preheat relaxation test. (Only if above value is checked true)
Temperature at which the testis conducted.