Download Electronic load combination using the NOVA

Autolab LED Driver User Manual
Figure 66 – Sampling the time domain data for Channel X and Channel Y
Close the FRA sampler with the
button.
The frequency scan can now be defined in the procedure editor by clicking the
button next to the FRA frequency scan command (see Figure 67).
Figure 67 – Opening the FRA frequency scan editor
The FRA frequency scan window will be displayed. The highest frequency, lowest
frequency, number of frequencies and frequency distribution can be defined in this
editor (see Figure 68). The amplitude can also be defined in mA (or in A,
depending on the settings used in the FRA sampler).
69 | P a g e