Download RTD Input Module Type AJ65SBT2B

PROGRAMMING
1
OVERVIEW
(3) Program example
Turns on Y60 when a data link error
occurs.
CH1 Conversion enable flag (RY00):
Enable
CH2 Conversion enable flag (RY01):
Enable
CH1 Measurement range
(RY08 to RY0A)
:2 (Pt100 (-200 to 850
))
2
SYSTEM
CONFIGURATION
Turns on MC contact (M100) when
data link is normal.
3
SPECIFICATIONS
Reads data link status.
CH2 Measurement range
(RY0B to RY0D)
:2 (Pt100 (-200 to 850
))
Disconnection detection upper/lower
limit selection flag (RY14): Off (Down
scale)
PROCEDURES AND
SETTINGS BEFORE
OPERATION
4
5
CH2 Averaging processing selection
(RWw1): Count average (5 times)
Turns on Initial data setting completion
flag (RY18).
Turns on Initial data setting request
flag (RY19).
CH1 Conversion enable flag (RY00):
Enable
CH2 Conversion enable flag (RY01):
Enable
6
TROUBLESHOOTING
CH1 Averaging processing selection
(RWw0): Sampling processing
PROGRAMMING
Offset/gain value selection flag (RY17):
On (Factory default setting)
Turns on Initial data setting request
flag (RY19).
Turns off Initial data setting request
flag (RY19).
APPENDIX
Turns off Initial data setting completion
flag (RY18).
Figure 5.7 Program example (when the QCPU (Q mode) is used) 1/2
* 1: The program in the dotted area is required only when the initial setting is changed.
INDEX
5
5.3 Program Example When the QCPU (Q mode) is Used
5-7