Download User Manual

C RY S TA L GUARD (Ver-4.5)
2.2 Site Requirements
CRYSTAL is designed to work in a normal environment.
The unit should be placed away from
1 Processes producing electricity, fumes,
dust, gasses or radiation (e.g. silicon or
halon contamination from photo copying or
fire protection equipment)
2 Electrical meters or switchgears
3 Water pipe, gas meters, pipes or appliances
4 Dampness
5 Vibration
2.3 General
Ensure a good power point for the exchange with a 5 pin
socket & switch. If possible, the customer should be
asked to provide a “ clean” power supply direct from the
power distribution board. CRYSTAL is set to work at
220VAC, 50Hz mains supply.
WARNING:
ANTI-STATIC PRECAUTIONS MUST BE TAKEN WHEN
WORKING WITH THE CARDS OR COMPONENTS OF
CRYSTAL EPAX.
CAUTION:
Never insert or pull cards or any cable from the equipment
with the “power on” under any circumstances.
2