Download Customer Protocol_Firma_V3_070615.indd
Transcript
1. Confirm that the patient does not have any implanted devices, 1. Confirm that the patient does not have any implanted devices, pacemakers. pacemakers. Refer to the Contraindication list in theRefer User Manual. In any doubt, contact a physician. to the Contraindication list in the User Manual. In any doubt, contact a physician. 2. Remove all metal objects2.orRemove accessories (piercing, etc). (piercing, jewelry etc). all metal objectsjewelry or accessories 3. Clean the treatment area with water soap inwith order to and remove 3. thoroughly Clean the treatment areaand thoroughly water soap in order to remove lotion and makeup. lotion and makeup. 4. Take photos of the patient. 4. Take photos of the patient. 5. For body treatments only: 5. For body treatments only: While standing, • While patient is standing, mark thepatient area toisbe treated.mark the area to be treated. Divide the treatment area into 10x10 square cm. Mark the • Divide the treatment area into 10x10 square cm. Mark the boundaries or boundaries or corners with a permanent marker. corners with a permanent 6. marker. Position the patient comfortably on the treatment bed. 6. Position the patient comfortably on the treatment bed. 7. Clean the 3Deep™ treatment handpiece with 70% alcohol 7. Clean the Eclipse Firma treatment handpiece with 70% byisadry drybefore followed by a dry gauze. Makealcohol sure thefollowed handpiece starting a new treatment. gauze. Make sure the handpiece is dry before starting a new treatment. Performing the Treatment Performing the Treatment 1. Apply EndyMed gel in the first treatment square/area. 1. Apply gel provided with the to the first treatment square/area. 2. Firma Move the treatment handpiece on the selected 2. Move the treatment handpiece on the selected square/area square/area in a circular motion. in a circular motion. While constant motion, push thean trigger button to 3. While in constant motion,3.push theintrigger button to activate RF pulse. activate an RF pulse. 4. After completion of the pulse, measure the surface temperature using the laser 4. After completion of the pulse, measure the surface thermometer. temperature using the laser thermometer. 5. If the temperature is < 40ºC – increase power by 2W and perform an additional 5. If the temperature is < 40ºC – increase power by 2W and pass. perform an additional pass. 6. If the temperature is > 42ºC decrease poweris by 2W -and perform an by additional 6. If-the temperature > 42ºC decrease power 2W and perform an additional passes. passes. 7. aWhen least 6 passes a face(for treatment) or 8 passes 7. When at least 6 passes (for faceattreatment) or 8(for passes a body treatment) (for a body treatment) at temperature > 40ºC have been at temperature > 40ºC havecompleted been completed consecutively, move to the next consecutively, move to the next treatment area treatment area and repeat the procedure. and repeat the procedure. FOR SUCCESS Quick Reference Guide Pre – Treatment Preparation Pre–Treatment Preparation PRODUCT PROTOCOL Skin Tightening (PURE) Page 1 of 2 This document DOES NOT replace the PURE by EndyMed™ User Manual and Application Guide. Setting Treatment Parameters 1. From the Main Menu, choose the desired application. ND_DOC00089 US Rev A 2. Choose the appropriate handpiece according to the application. 3. Choose the target area for treatment (1). 4. Modify the power settings (optional) (2). 5. Click the “Start” button (3) to confirm settings and enable handpiece trigger. The “Pause” button will start blinking. 6. The time counter (4) will indicate the time remaining to complete the pass. 7. The “Passes” counter (5) counts the passes performed. It can be reset by clicking the button. Need Help? The Eclipse Team is Here to Assist (800) 759-6876 Eclipse Aesthetics, LLC. 13988 Diplomat Drive, Suite 160 Dallas, Texas 75234 800-759-6876 www.EclipseAesthetics.com 1. Clean the treatment handpiece with 70% alcohol followed by dry gauze. 2. Make sure the handpiece is dry before starting a new treatment. Accessories Multiple easy-to-use handpieces for specific target zones are available. Each unit comes standard with two handpieces. Selection available and uses can vary based on model. Please contact your representation with any questions. FIRMA FIRMA FIRMA FIRMA FIRMA iFine Fine Standard Large Shape It is suggested to provide Firma sessions as a bundle package. Many provide four sessions on average, but that may vary based on a patient’s needs. Estimated Patient Fees: Range $3,500 to $4,500 based on patient treatment plan. Need Help? The Eclipse Team is Here to Assist. (800) 759-6876 FOR SUCCESS Pricing PRODUCT PROTOCOL Post – Treatment Eclipse Aesthetics, LLC. 13988 Diplomat Drive, Suite 160 Dallas, Texas 75234 800-759-6876 www.EclipseAesthetics.com