Download ZFX-C Smart Sensor User`s Manual

Overview of Settings and Measurement
Operation Modes
MENU
RUN
The ZFX-C has the following three modes. Switch to the desired
mode before you start operation. To switch the operation mode,
use the mode switch.
1
ADJ
Mode
Description
MENU mode
This mode is for setting the measurement
conditions. The easy-to-follow icon-based
display allows operations to be performed
intuitively.
BEFORE USE
Mode switch
Top Screen
Top menu
LIVE
TEA
Bank
Tool
ADJ mode
This mode is for checking the measurement status and adjusting conditions.
Measurement results are only displayed
on the monitor and are not output.
Save
OK
Individual result
353ms
Camera 0
0.Bank00
0.Pattern Search
OK
92
462
352
15
Previous
This mode is used for performing actual
measurement. Measurement results are
displayed on the monitor and output.
System
Top Screen
Judge
Correlation
Position X
Position Y
Angle
RUN mode
Setup
TE
A
Next
Dsplay SW
Adjust
Top Screen
OK
Individual result
353ms
Camera 0
0.Bank00
0.Pattern Search
Judge
Correlation
Position X
Position Y
Angle
Previous
ZFX-C User’s Manual
OK
92
462
352
15
Next
TE
A
Dsplay SW
Capture
Overview of Settings and Measurement
31