Download Technical Manual-System Description

Technical Manual - System Description
U-SYS SoftX3000 SoftSwitch System
Chapter 1 System Introduction
5)
Security in the aspect of operations and maintenance
z
Supports dual-certification login security management pertaining to both account
and workstation IP address.
z
Supports multi-level user authority management.
1.4.6 Smooth Expansion Capability
SoftX3000 is designed with a smooth expansion capability in the aspects of hardware
design and system processing capability, with the potential expansion requirements of
the customers taken into account.
1)
Hardware design: Open Standards Telecom Architecture Platform (OSTA) is the
hardware platform of SoftX3000. The platform has a modular overlap structure. By
expansion of processing frames in the mode of building blocks (frames are
interconnected through LAN Switch), 1 to 18 frames can be configured freely and
the customers’ requirements for smooth expansion can be satisfied.
2)
System processing capability: The BHCA value of SoftX3000 is up to 16000k.
Enough space is reserved for future service expansion, so increasing service or
expansion requirements of the customers can be satisfied.
1.4.7 Optimized Charging Capabilities and Bill Management Functions
SoftX3000 has optimized charging capabilities. SoftX3000 not only supports to charge
voice, data and multimedia services with several charging modes and bill types, but
also provides optimized bill management functions. The main characteristics are as
follows:
1)
Supports multiple charging modes based on call duration, bearer capability, time
segment, time category, or chargeable party (calling, called or third party).
2)
Supports charging of supplementary services.
3)
Supports charging of prepaid card.
4)
Supports to charge Centrex groups.
5)
Supports quota restricted calling and timed restriction.
6)
Supports a variety of bill types, such as detailed bill, subscriber charging meter bill,
trunk charging meter bill, charging meter statistical bill, trunk occupation duration
statistical bill, alarm bill, failure bill, complaint bill and intelligent bill.
7)
Supports bill restricted calling functions.
8)
Supports to store bills depending on respective modules, services and time.
9)
Supports the automatic backup, dumping, sorting and format conversion functions
of bills.
10) Supports standard FTP and FTAM charging interfaces.
1-9