Download Digital I/O Modules - Artisan Technology Group

4
Digital I/O Modules
Overview
In addition to providing the module’s electrical specifications, this document tells
you how to:
• install the module into a chassis.
• wire the module’s terminal block.
• install the Octal Filter Label.
Hazardous Location Considerations
This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D or
nonhazardous locations only. The following warning statement applies to use in
hazardous locations.
WARNING
EXPLOSION HAZARD
Substitution of components may impair suitability for Class I, Division 2.
Do not replace components or disconnect equipment unless power has been
switched off or the area is known to be nonhazardous.
Do not connect or disconnect components unless power has been switched
off or the area is known to be nonhazardous.
All wiring must comply with N.E.C. article 501-4(b).
Publication 1746-IN027C-EN-P - August 2008
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com