Download User Manual

Transcript
Operating Principle
1-3 Characteristics (continued)
Reagent compartment
•
•
•
Sample volume (µL)
•
•
•
Reagent volume (µL)
•
•
•
Reaction volume (µL)
Pipetting system
•
Spectrophotometer
•
•
•
•
•
Luminometer
•
•
Reaction carousel
•
•
•
Cuvette loader
•
•
•
Common liquid consumables
•
•
•
•
Waste collection
•
•
Power supply
•
•
•
IDS-iSYS User Manual - Rev C1
Software version V4.XX
•
•
•
•
15 rails, each of which can hold:
• 1 x Immunoassay cartridge.
• 3 x 45 mL Biochemistry Reagent.
• 6 x 20 mL (or 5 mL) Biochemistry Reagent.
Storage at 12-15°C whilst operating.
Internal storage between 8-10°C in standby mode.
Immunoassay: from 4 to 300 µL.
Biochemistry: from 4 to 50 µL.
Programmable in steps of 0.5 µL.
Biochemistry: from 10 to 400 µL.
Immunoassay: from 10 to 400 µL.
Programmable in units of 1 µL.
Immunoassay and Biochemistry: from 180 to 550 µL.
Pipetting reagents and samples by probe.
Liquid level detection by capacitance.
Preheating of reagents/samples.
Internal and external rinsing between each pipetting of sample.
Spectrophotometer with interferential filters.
6 wavelengths available: 340, 405, 500, 540, 580 and 620 nm.
Halogen lamp. Transmission by fibre optic.
Linearity: Up to 3 OD.
Optic path of cuvettes: 0.7 cm.
Wavelengths: from 300 to 500 nm.
Linearity: Up to 10 Million RLU.
Thermo regulated at 37°C.
90 positions for disposable cuvettes.
Automatic cuvette supply by cuvette loader.
Loader for cube of cuvettes.
Contains 960 disposable cuvettes.
Thermostatically controlled.
IDS-iSYS System Liquid (5 litre containers).
IDS-iSYS Wash (10 litre containers).
IDS-iSYS D-Sorb (1 litre containers).
Immunoassay only: IDS-iSYS Triggers A & B (250 mL each).
10 litre container for liquid waste posing a biological risk.
Solid waste (cuvettes) disposed of in re-usable container.
Voltage: 220 - 240 V.
Frequency: 50 - 60 Hertz.
Maximum power consumed: 1000 VA.
Operating Principle 1-3
7