Download User Manual
Transcript
Operating Principle 1-3 Characteristics (continued) Reagent compartment • • • Sample volume (µL) • • • Reagent volume (µL) • • • Reaction volume (µL) Pipetting system • Spectrophotometer • • • • • Luminometer • • Reaction carousel • • • Cuvette loader • • • Common liquid consumables • • • • Waste collection • • Power supply • • • IDS-iSYS User Manual - Rev C1 Software version V4.XX • • • • 15 rails, each of which can hold: • 1 x Immunoassay cartridge. • 3 x 45 mL Biochemistry Reagent. • 6 x 20 mL (or 5 mL) Biochemistry Reagent. Storage at 12-15°C whilst operating. Internal storage between 8-10°C in standby mode. Immunoassay: from 4 to 300 µL. Biochemistry: from 4 to 50 µL. Programmable in steps of 0.5 µL. Biochemistry: from 10 to 400 µL. Immunoassay: from 10 to 400 µL. Programmable in units of 1 µL. Immunoassay and Biochemistry: from 180 to 550 µL. Pipetting reagents and samples by probe. Liquid level detection by capacitance. Preheating of reagents/samples. Internal and external rinsing between each pipetting of sample. Spectrophotometer with interferential filters. 6 wavelengths available: 340, 405, 500, 540, 580 and 620 nm. Halogen lamp. Transmission by fibre optic. Linearity: Up to 3 OD. Optic path of cuvettes: 0.7 cm. Wavelengths: from 300 to 500 nm. Linearity: Up to 10 Million RLU. Thermo regulated at 37°C. 90 positions for disposable cuvettes. Automatic cuvette supply by cuvette loader. Loader for cube of cuvettes. Contains 960 disposable cuvettes. Thermostatically controlled. IDS-iSYS System Liquid (5 litre containers). IDS-iSYS Wash (10 litre containers). IDS-iSYS D-Sorb (1 litre containers). Immunoassay only: IDS-iSYS Triggers A & B (250 mL each). 10 litre container for liquid waste posing a biological risk. Solid waste (cuvettes) disposed of in re-usable container. Voltage: 220 - 240 V. Frequency: 50 - 60 Hertz. Maximum power consumed: 1000 VA. Operating Principle 1-3 7