Download User Manual

English
4. Initial start-up
Direct connection between video server and PC / laptop
1. Make sure to use a crossover network cable
2. Connect the cable with the Ethernet port of the PC / Laptop and the video server
3. Connect the power supply to the video server
4. Configure the IP address of the PC / Laptop to 169.254.0.1
5. Continue with point 5.1 in order to finish the initial installing and build-up a connection to
the video server
c Crossed Ethernet cable
Connecting the video server by using a router / switch
1. Make sure to use a pair of patch cables
2. Connect the cable with Ethernet port of the PC / laptop with the router / switch.
3.
4.
5.
6.
Connect the cable with the network cable and with the router / switch.
Connect the power supply to the video server
If there is a name server (DHCP) available in your network then set the IP address of
your PC / laptop to “automatically receive IP address”
If there is no name server (DHCP) available set the IP address of your PC / laptop to
169.254.0.1
Continue with point 5.1 in order to finish the initial installing and build-up a connection to
the video server
Internet
Patch cable
69