Download Integra User Manual - Precision Ag Solutions

APPLICATION
A suggested name for the implement appears. Press
for the implement. Press
to accept or press
to enter a name
to continue.
18. Select Implement
Press
to continue.
19. Select Second Implement
Use drop-down menu to select Implement or press
implement is desired, press
to add second implement. If no second
to continue.
20. Select Speed Source
Use drop-down menu to select Primary Source, set Backup Source, and configure Auxiliary Channel.
Press Calibrate Speed Sensor to launch the Speed Sensor Calibration Wizard. Press
continue.
to
21. Enter Configuration Name
A suggested name for the configuration appears. If desired, press
configuration. Press
to enter a different name for
when complete.
The completed configuration should now appear under the Application heading located on the
Configuration tab of the Configuration Setup screen.
The Operating Configuration will now be able to be selected when starting a new Field Operation with
the Field Operation Wizard.
CREATE AIR SEEDER CONFIGURATION
Configuration
Planting
Press: Home button > Setup (wrench) button > Configuration (tractor) button > Configuration tab > Add
(+) button > Planting button to create a new planting operation configuration, which may also include
application equipment
A wizard will guide you through the process of selecting or creating a vehicle, implement and controller.
1. Select Vehicle
Use drop-down menu to choose a vehicle, or press
continue.
to enter a new vehicle. Press
to
Note: It is recommended that Vehicle Offset Information be entered before continuing with the configuration
process.
247
STRIP TILL
17. Enter Implement Name