Download 2 System Configuration

User´s Manual
FK-C2
Save: Click to Save changes.
Back: Go back to the Logical Link page.
4.1.19.1.2 Upstream Egress SLA
Web interface
To configure the Upstream Egress SLA in the web interface:
1.
Click ONU Management.
2.
Click ONU List.
3.
For the selected ONU, choose the option Logical Link in the function combo box.
4.
For the selected Logical Link, choose the option SLA in the function combo box and then click on the
button "Upstream Egress SLA".
5.
Set the parameters.
6.
Click Save.
Figure 4-24: The Upstream Egress SLA Configuration
Parameter description:
 Min Shaper/Min Bw:
This parameter will guarantee a minimum bandwidth.
Range: 256~1000000 (Unit: Kbps)
Default: 0
 Max Shaper/Max Bw:
The maximum allowed use Bandwidth.
Range: 256~1000000 (Unit: Kbps)
Default: 100000
 Min and Max Shaper/Max Burst:
Range: 1~256 (Unit: KBytes)
Mix Default: 0
Max Default: 255
 Min and Max Shaper/Schedule Weight:
Range: 2~ 32.The minimum shaper/scheduler level must be less than the maximum shaper/scheduler level. The
Minimum and Maximum Scheduler Weight for the link SLA must be set to the same value. If they are set to
different values, the firmware will use the smaller of the two values and ignore the larger value.
 Buttons
Save: Click to Save changes.
Back: Go back to the Logical Link page.
83