Download User`s Manual

English
Installing the Locking Wire Saddle
For USB interface models, the locking wire saddle is included to prevent the USB
cable from falling off the connector.
1. Insert the tip of the locking wire saddle into the leftmost hole in the back of
the printer.
Rocking wire saddle
2.
Hook the USB cable with the locking wire saddle.
Installing Roll Paper
1.
Place your fingers in the hollows under the printer cover shown in the
illustration below, and pull in the direction of the arrow to open the printer
cover.
Hollows
2.
Remove the used roll paper core if there is one.
6 TM-T81 User’s Manual