Download User Manual Version 4.0

Hardware Setup
Portrait Light
1.
The Portrait lighting unit easily attaches to the top of the CCD 1000 video camera with the mounting screw. Adjust the angle of the light so it points forward.
2.
Attach the 4-pin cable from the portrait light to the 4-pin connector on the back
of the Auto Light box.
TruFlash
The TruFlash is used only in conjunction with the FlashPoint 128, Flashbus, or
FlashPoint 3D video card, and Imaging Technology Corporation’s CCD 1000
video camera. It is mounted directly to the video camera using the built-in setscrew. A six-inch cable attaches the TruFlash to the video camera.
1.
The 9-pin connector attaches to the back of the TruFlash light.
2.
The male end of the 25-pin connector attaches to the back of the CCD 1000
video camera.
3.
The female end of the 25-pin connector attaches to the 10 foot cable connected
to the AutoLite box’s 25-pin video camera port.
The white plastic Diffuser covers the TruFlash’s strobe light. With the Diffuser on,
the effective distance between light and subject is 3-12 feet. The Diffuser reduces
strobe glare by half. With the Diffuser removed, the effective distance between
light and subject is 20 feet.
194
IDentifier for Windows version 4