Download PATIENT PROGRAMMER 37743

37743_Ch05.fm 7/31/07 4:02 pm
Size 4.625" x 6.0" (117 mm x 152 mm)
UC200xxxxxx EN
Medtronic Confidential
NeuroPatntR03
Table 5.1 Warning screens (continued)
Screen
Cause and action
Call your doctor
The system is not working
correctly. Stimulation may have
stopped.
Read the error code at the
bottom of the screen.
Error codes 0 to 252: Remove
batteries from the patient
programmer, wait several
seconds, then re-insert the
batteries. If the error message
appears again, call your
doctor.
Other codes: Write down the
code shown on the screen.
Call your doctor.
Call your doctor
Your neurostimulator has
reached end of service.
Stimulation is not available.
Troubleshooting 5
Call your doctor.
120
EOS
Call your doctor
Your neurostimulator has been
reset. Stimulation is not
available.
Call your doctor.
POR
English 37743 2007-09
M928466A001
Rev X
Printing instructions: