Download GuardPoint Pro

Icons
Refresh: select to manually update system diagnosis status
Refresh every: select to automatically update system diagnosis status
Refresh delay (1 to 60 sec.): to modify the refresh delay, specify the number of seconds desired;
the new delay will take effect only if the “Refresh Every” key is selected; by default there is an
automatic refresh every 5 seconds
Table
Icon: icon associated with the input
Name: input name
Alarm physical status: open or close
Time activation: the input status switches between:
Armed (in red): the arming process has been followed and the current time
falls within the activation boundaries of the weekly arming program
Not now (in black): the arming process has been followed and the current
time falls outside the activation boundaries of the weekly arming program
Disarmed: the process was not followed
The system automatically goes from “Not now” to “Armed”, and vice versa, according to time
zones.
Active alarms: coloured icons signal the alarm status (active, acknowledge and confirmed) in the
table as well as in the tool bar
Red icon: armed alarm
Green icon: acknowledge alarm
No icon: confirmed alarm
View more information: select this option to display the complete input information table
Extensive table
Icon: icon associated with the input
Name: input name
Controller: controller connected to the input
Input number on the controller: technical data about the input’s physical connection
Type: digital or analog
NO/NC: input normal status, normally open, normally closed, line cut or line short cut
Alarm physical status: open or close
Alarm status: the logical status results from the combination of the normal status and the
physical status
Normal, physical and logical status of an input
Input
Normal status
Physical status
Logical status
I1
NC
Closed
Off
I1
NC
Open
On
I2
NO
Open
Off
I2
NO
Closed
On
GuardPoint Pro User Manual – Rev G - Doc. 10UE400
87