1
Download Manuals - Pro
Transcript
Image AnyPlace User’s Manual 0020D1.01 Warp Maps may be selected with the IR remote (using the dedicated eWarp button or by navigating to the menu.) User Warp Maps may also be selected using the Control Protocol. User Warp Maps are activated by selecting the User Warp Map Selection sub-menu from the Projection sub-menu in the Advanced main menu. Up to 8 Warp Indices may be selected. User Warp Maps Indices are grayed out if User Warp Maps have not been loaded into these locations. Please note that aspect ratio treatments do not work with User Warp Maps. If you want to configure different aspect ratio treatments in User Warp Map, you must create a specific User Warp Map for each aspect ratio treatment that you wish to achieve. Please refer to the eWarp Designer 200 User’s Guide for complete detail on how to create and download User Warp Maps. © Flexible Picture Systems Page 37 of 49
