Download Tools\PCAN-Router Pro\Documentation\Tutorial - PEAK

PCAN-Router Pro – PPCAN-Editor Tutorial
4.9
4.10
4.11
4.12
4.13
4.14
4.15
4.16
4.17
4.18
4.19
4.20
4.21
4.22
4.23
4.24
Exercise 3d: (Variation 3a) Transmission only
on Remote Request
Exercise 4a: Manipulating CAN signals using
SCALE and OFFSET
Exercise 4b: Manipulating CAN signals using
Function block Characteristic curve
Exercise 5a: LED activity on CAN reception
and transmission
Exercise 5b: Controlling LED manually or
conditionally
Exercise 5c: Controlling LED externally
Exercise 5d: Controlling Beeper (continuous
tone)
Exercise 5e: Controlling the Beeper (tone
sequence)
Exercise 6a: Reading date and time (Hardware
Diagnostics)
Exercise 6b: Setting date and time (Hardware
Diagnostics)
Exercise 6c: Reading the module ID (Hardware
Diagnostics)
Exercise 6d: Reading firmware version and
configuration version (Hardware Diagnostics)
Exercise 7a: Sleep and WakeUp via CAN
Exercise 7b: Sleep and WakeUp via external
pin
Exercise 7c: Sleep and WakeUp via timed alarm
Exercise 8a: Changing the bit rate
Appendix A
Literature and References
4
39
41
44
50
53
58
60
62
64
66
67
70
71
72
73
74
76