Download User Manual
Transcript
2 Analyzer Settings In the online mode configuration can be performed in the following way: Enter the following data: the access point name (SSID field) and in case of a secured network tick Modify box and enter the password (Key field). In case of a non-secured network, "Key" field remains empty, but "Modify" box must be ticked. Fig. 39. Wi-Fi configuration screen in online mode. Select the method for assigning IP address. In case of manual mode - enter appropriate values into fields: IP Address, Net Mask and Gateway. In automatic mode, select DHCP. With USB connection, MAC Address field will be filled-in automatically (as read from the analyzer). Port field is not editable, it is always 4002. In case of operating in other subnetworks (the Internet), fill-in External IP Address and External Port fields. For a direct connection (tablet analyzer), and for working in a local network (tablet Wi-Fi router analyzer) these fields must be left inactive. If the analyzer has a static IP address, the search time may be shortened. To do this, enter IP address of the device in External IP Address field and enter "4002" in External Port field. Confirm the settings by pressing OK. This will send new data entered in fields: SSID, Key, IP configuration, to the analyzer. If the correct data have been entered, the analyzer will try to connect to Wi-Fi access point. After disconnecting, the connection status may be followed on screen <10/10>. The following procedure applies to offline mode, when the analyzer was previously configured, and there is a need to add it to the database or to edit Wi-Fi parameters that identify the device. To properly configure the connection, the following elements will be required: Physical Address of the analyzer (MAC Address), this parameter must be read from screen <10/10> of the analyzer. External IP Address and External Port. The parameters required to work in a different subnetwork than the tablet (computer), especially for connecting to the Internet. 51