Download User`s Manual
Transcript
4.2.2 Building Analysis To start the building-scale analysis, both the Facility Information screen and the Building Data screen in the Facility/Building Info module must be completed, with valid data saved in each required data field. Clicking on the Building Analysis module button begins this analysis. Once FRESA is done with it's building-scale calculations, a table with Prescreen, SIR, and PB outputs appears on the View All Options screen. If a YES or MAYBE is generated, continue with the screening process by entering the remaining required data in the technology-specific screens. Select the appropriate technology from the pull-down menu in the upper right corner of the View All Options screen to accomplish this. Enter all of the required data into the data fields, then click on the Do Analysis button. If there is missing or invalid input data, all results will default to a question mark (?). The data can either be temporarily stored by clicking on the Do Analysis button or changed by clicking on the Save Changes button. To "iterate" on the technology-specific analysis, the Do Analysis button recalculates the output given different inputs in the data fields. To optimize the results by varying inputs, use the Do Analysis button until the best configuration is chosen. Then save the changes with the Save Changes button. Pull-Down Technologies Menu Building-Scale Analysis Button FRESA-Generated Building-Scale Results Figure 4. Building-scale analysis results screen 22