Download User`s Manual

Transcript
4.2.2
Building Analysis
To start the building-scale analysis, both the Facility Information screen and the Building Data screen in the
Facility/Building Info module must be completed, with valid data saved in each required data field.
Clicking on the Building Analysis module button begins this analysis. Once FRESA is done with it's
building-scale calculations, a table with Prescreen, SIR, and PB outputs appears on the View All Options
screen.
If a YES or MAYBE is generated, continue with the screening process by entering the remaining required
data in the technology-specific screens. Select the appropriate technology from the pull-down menu in the
upper right corner of the View All Options screen to accomplish this. Enter all of the required data into the
data fields, then click on the Do Analysis button. If there is missing or invalid input data, all results will
default to a question mark (?).
The data can either be temporarily stored by clicking on the Do Analysis button or changed by clicking on
the Save Changes button. To "iterate" on the technology-specific analysis, the Do Analysis button
recalculates the output given different inputs in the data fields. To optimize the results by varying inputs,
use the Do Analysis button until the best configuration is chosen. Then save the changes with the Save
Changes button.
Pull-Down Technologies Menu
Building-Scale Analysis Button
FRESA-Generated Building-Scale Results
Figure 4. Building-scale analysis results screen
22