Download DANAS 2.x User Manual

-
Fix/Release curves: you can move horizontally one graph path to the respect of the
others. It can be helpful, in Lap and Time mode, so you can align the paths on any d esired
point not only on the Finish Line, for example you can compare two distinct laps aligning
them on a specific corner. When you activate this function the reference is again the Default
Lap that is always plotted, then you can choose which laps are to be moved. Activate the
function from this menu or by the fast icon on the bar. Once activated the default lap will be
activated, then you can select the laps to be moved (deselecting them the offset would come
back to zero). Once selected (even more than one) you can choose which laps to move
clicking on their names. The line will have a green background an d can be translated.
Fig. 79 - Fix/Release curves
To move green selected laps you can use two ways:
3) By the “Move” mode, or using the icon with le lock, you can translate graphs dragging
them with right mouse button
4) By “disalign with sx-dx”, or using the icon with paper sheets, you can translate curves
clicking the starting point with left button and the end point with right mo use button.
Fig. 80 –Icons for ‘move’ and ‘disalign’ graphs
51
Danas Vers.2.x User Manual
www.I2M.it