Download Central Management System

4.7.1.5
To Set the MMS/SMS Setting
To use this feature, GSM/GPRS modem is required. Connect the GSM/GPRS modem to the serial
COMM port of PC. Next to the SMS/MMS check box, click Detail.
1.
Select the port number in ComPort drop down list from where the GSM/GPRS modem is
connected.
Click Enter Pincode button to fill in pin code of your mobile phone if your mobile system require
verifying pin code for SMS/MMS sending.
2.
i
3.
4.
5.
6.
The incorrect pin code will lock your sim card.
In Phone Num text box, enter the contact number.
You may now set to send thru SMS or MMS. If you enable SMS setting, just enter the message
in the Message Text box. Click SMS Test to verify the SMS setup is available.
If you enable MMS, enter the Loing account, Password, APN name, WAP IP, MMS address,
subject of MMS message and the message. User can Import the previous MMS setting or
Export the current MMS setting. If you are not sure, please contact your mobile service provider.
To verify the setting, click MMS Test.
Click OK to accept the new settings and Cancel to exit without saving.
152