Download CDF USER MANUAL

s
CDF-UM-001 Iss2Rev1
CDF-UM-01
issue 2 revision 1
Date: 23/01/03
Page 26 of 48
The first three letters of any cell name should be an acronym given to that domain, i.e.
“ABC_parameter_definition”.
This acronym should be the first three letters of the domain name. The rest of the name can be used
to describe the parameter, e.g. “SYS_total_wet_mass”
The cell names can be applied to the Value column of the Results sheet by selecting the cells of the
Cell Name column and Value column. Then select the “Create Cell Name” option on the CDF
menu, and the names in the Cell Name column will be applied to the Value column. See example of
Figure 3-9.
Figure 3-9: Example "Cell Names" in Output sheet
The workbooks should be set up so that a “results” parameter within a working sheet is referenced
by the corresponding parameter value in the Results sheet list. When the value of the result
changes, this should automatically be seen in the Results sheet. The Corresponding list in the Data
Exchange should be able to update this value. This means that the new value will automatically be
transferred to the Data Exchange when the Domain file is saved, and the Data Exchange is
updated. No copying and pasting of the new value is required.