Download micro-T Software Operations Manual and Reference Guide Revision

NexSens Technology, Inc.
The housings are designed for use in water or direct ground burial for temperatures between -30°C to
70°C, which is the same temperature range for the accuracy specifications of the DS1921G micro
Temperature logger. The waterproof housing units have also been tested for pressure depths up to 100
meters, but are likely to go much deeper.
A clear screw-on cap allows you to view the top of each temperature logger, allowing you to immediately
read the type and serial number with a simple glance. A lubricated o-ring seal creates a complete water-tight
assembly.
Contact a NexSens Applications Specialist for information regarding special micro temperature housing
pricing, availability, and minimum quantity. Standard colors are yellow, blue, and black, but other housing
colors are available as well with a minimum quantity purchase.
Abrasive Chemicals
For applications that require submerging micro temperature loggers in abrasive chemicals, underwater
housings made from durable Teflon material are available. Just like the standard underwater housing, each
housing holds one temperature logger and is supplied with an Allen Wrench to allow for easy assembly
onto a 3/16" cable or rope. Teflon housings have also been tested for pressure depths up to 100 meters,
but are likely to go much deeper. A clear screw-on cap allows you to view the top of each temperature
logger, allowing you to immediately read the type and serial number with a simple glance. A lubricated oring seal creates a complete water-tight assembly.
Contact a NexSens Applications Specialist for information regarding special micro temperature housing
pricing, availability, and minimum quantity. Speciality housing colors are available as well with a minimum
quantity purchase.
Extreme Temperatures
For applications that require submerging micro temperature loggers into extreme temperatures, underwater
housings made from resistant Ultem material is available. These housings are temperature rated from -30°C
to 180°C; larger than any micro temperature logger temperature range. Just like the standard underwater
housing, each housing holds one temperature logger and is supplied with an Allen Wrench to allow for
easy assembly onto a 3/16" cable or rope. They have also been tested for pressure depths up to 100
meters, but are likely to go much deeper. A clear screw-on cap allows you to view the top of each
temperature logger, allowing you to immediately read the type and serial number with a simple glance. A
lubricated o-ring seal creates a complete water-tight assembly.
Contact a NexSens Applications Specialist for information regarding special micro temperature housings
pricing, availability, and minimum quantity. Other housing colors are available as well with a minimum
quantity purchase.
micro-T Software Operations Manual
13