Download Concealed Floor Standing Type

EDUS39-600-F7_b
Specifications
2. Specifications
2.1
FXLQ
Floor Standing Type
FXLQ12MVJU9
FXLQ18MVJU9
FXLQ24MVJU9
Cooling Capacity1
Model
Btu/h
12,000
18,000
24,000
Heating Capacity2
Btu/h
13,500
20,000
27,000
Ivory White (5Y7.5/1)
Ivory White (5Y7.5/1)
Ivory White (5Y7.5/1)
23–5/8 × 44–7/8 × 8–3/4”
(600 x 1139.8 x 222.3 mm)
23–5/8 × 55–7/8 × 8–3/4”
(600 x 1419.2 x 222.3 mm)
23–5/8 × 55–7/8 × 8–3/4”
(600 x 1419.2 x 222.3 mm)
3 ×14 × 17
3 ×14 ×1 7
3 ×1 4× 17
3.04 ft. (926.6 mm)
Casing Color
Dimensions: (H×W×D)
Coil (Cross
Fin Coil)
Fan
in
(mm)
Rows × Stages × FPI
Face Area
ft²
(mm²)
2.15 ft. (655.3 mm)
3.04 ft. (926.6 mm)
Model
2D14B13
2D14B20
2D14B20
Type
Sirocco Fan
Sirocco Fan
Sirocco Fan
Motor Output
kW
0.025
0.035
0.035
Air Flow Rate (H/L)
cfm
280/210
490/380
560/420
Drive
Temperature Control
Sound Absorbing Thermal Insulation Material
Air Filter
Direct Drive
Direct Drive
Direct Drive
Microprocessor Thermostat for
Cooling and Heating
Microprocessor Thermostat for Cooling
and Heating
Microprocessor Thermostat for Cooling
and Heating
Glass Fiber/ Urethane Foam
Glass Fiber/ Urethane Foam
Glass Fiber/ Urethane Foam
Resin Net (with Mold Resistant)
Resin Net (with Mold Resistant)
Resin Net (with Mold Resistant)
Liquid Pipes
in / mm
1/4 / 6.4 mm (Flare Connection)
1/4 / 6.4 mm (Flare Connection)
3/8 / 9.5 mm (Flare Connection)
Gas Pipes
in / mm
1/2 / 12.7 mm (Flare Connection)
1/2 / 12.7 mm (Flare Connection)
5/8 / 15.8 mm (Flare Connection)
Drain Pipe
in (mm)
27/32” (21 mm) O.D
(Vinyl Chloride)
27/32” (21 mm) O.D
(Vinyl Chloride)
27/32” (21 mm) O.D
(Vinyl Chloride)
Machine Weight (Mass)
Lbs
66
80
80
Sound Level (H/L)4
dBA
36
40
41
Fuse,
Thermal Protector for Fan Motor
Fuse,
Thermal Protector for Fan Motor
Fuse,
Thermal Protector for Fan Motor
Electronic Expansion Valve
Electronic Expansion Valve
Electronic Expansion Valve
R-410A Series
R-410A Series
Piping
Connections
Safety Devices
Refrigerant Control
Connectable Outdoor Unit
Standard Accessories
Operation Manual, Installation
Manual, Insulation for Fitting, Drain
Hose, Clamps, Screws, Washers, Level
Adjustment Screw.
Operation Manual, Installation Manual,
Insulation for Fitting, Drain Hose,
Clamps, Screws, Washers, Level
Adjustment Screw.
Drawing No.
R-410A Series
Operation Manual, Installation Manual,
Insulation for Fitting, Drain Hose,
Clamps, Screws, Washers, Level
Adjustment Screw.
C:3D045640
Notes:
1. Nominal cooling capacities are based on the following conditions:
Return air temperature: 80°FDB, 67°FWB
Outdoor temperature: 95°FDB
Equivalent ref. piping length: 25 ft / 7.5 m (Horizontal)
2. Nominal heating capacities are based on the following conditions:
Return air temperature: 70°FDB.
Outdoor temperature: 47°FDB, 43°FWB
Equivalent ref. piping length: 25 ft / 7.5 m (Horizontal)
3. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
4. Anechoic chamber conversion value, measured under JISB8616 conditions. During actual operation,
these values are normally somewhat higher as a result of installation conditions.
5. Refer to page 11 for Power Input.
FXLQ-M / FXNQ-M
3