Download Tebis application software

3.6.6 Lock-up
The Lock-up function is used to lock the output in a predefined state.
Priority: Manual mode > Priority > Lock-up > Basic function.
The Lock-up prevents actuation until an unlock command has been received.
The Lock-up duration can be set.
Parameter
Lock-up type
Description
Value
The Lock-up acts:
Directly on the switch actuator.
As long as the Lock-up is active, the output can only be controlled by
higher priority commands.
Output lock-up*
On selected communication objects.
Object lock-up
As long as the Lock-up is active, the output can only be controlled via
specific selectable objects.
Parameter
Lock-up duration
Description
Value
The duration of the Lock-up is
Not time limited, the lock-up is only authorized by means of a telegram Permanently*
on Lock-up 1 object.
Is active for a limited time, the control of the output is authorized after Time limited
expiry of this time.
* Default value
TYA606E
47
6T 8099-02b