Download 9210B Xlite Data Logger

Transcript
Use the controls on the screen to select the com port, baud rate, type of connection (direct,
modem, radio, TCP/IP, Telnet), 640X480 (“big screen” mode when selected) and related values.
Setup is an advanced option that allows the SSP timings to be modified to accommodate
different types of connections. Select OK and XTerm will begin operation with the type of
communications selected.
Connection types are as follows:
Direct: Serial cable from Xpert to PC
Modem: Allows XTerm to dial out on a pc modem to a Xpert with modem
Radio: Allows XTerm to control a line of site radio to talk to a Xpert
TCP/IP: Allows XTerm to communicate with a networked Xpert2. If the Xpert2 is connected to
a firewall, and TCP/IP access is desired, than the firewall must be configured such that
connections on TCP port 52733 will be allowed to the Xpert2. This option may also be used to
connect to an Xpert indirectly through another copy of Xterm running on a PC at the IP address
specified (Useful to assist other users, since all actions performed on remote pc are viewed at the
pc connected to the Xpert/9210).
Telnet: Allows XTerm to communicate with a networked Xpert2 running V3.2 or later of
Remote. If the Xpert2 is connected to a firewall, and telnet access is desired, than the firewall
must be configured such that connections on TCP port 23 will be allowed to the Xpert2. In
general the TCP/IP option is quicker because it has less overhead, but since command line access
occurs over telnet port 23, Xterm and command line can share the telnet port, if desired, limiting
the number of ports that must be opened in the firewall.
Redirector: Allows XTerm to communicate to a station hosted by the Sutron Redirector service.
Pressing the Redirector button will allow to specify the user name and password assigned to you
by Sutron for this purpose. You select the station you wish to connect to by entering its name in
the URL: box, or you may select it from the list of stations you own by pressing the Detect
button.
XTerm for the PocketPC does not show the 640x480 “big screen” option since its screen is too
small. The sample command line text area is also missing since the PocketPC does not have a
command line.
110
Bringing the Benefits of Real-Time Data Collection to the World
Sutron Corporation, Tel: 703-406-2800, http://www.sutron.com