Download 9210B Xlite Data Logger

Field Variable (FieldVar)
Inputs
Input
Outputs
Output (pass-through)
Description
The FieldVar block is used to “tag” properties in the setup so that these properties can be
changed in the same way as other system “tags” (ComsTags, Basic tags, etc.). System tags can
be changed via the Data tab, via a Basic program, via the “set” command, and via SSP
command. Note that changing the value of a property is reserved for users having setup access
priveleges.
The FieldVar block has one input and one output. Connect the output of the target block to the
FieldVar input. Viewing the properties of the FieldVar block shows a list of changeable
properties of the target block. Below is an example of the FieldVar properties screen when
hooked-up to a Measure block.
Put a check next to the property you want to tag. Checked properties must have unique Public
Names. This name defaults to the Internal Name when OK is pressed. The Public Name for a
property is changed by clicking the property name and then clicking Label…
Below is an example of how the Data tab looks when a Measure block has been connected to a
FieldVar block with Interval checked and assigned the public name of “Measure Interval”.
Bringing the Benefits of Real-Time Data Collection to the World
Sutron Corporation, Tel: 703-406-2800, http://www.sutron.com
251