Download Administration Guide

connecting a PC to the PC port. The default setting is "Enabled".
Enable LLDP
Control the LLDP (Link Layer Discovery Protocol) service. The default setting
is “Enabled”.
MAINTENANCE PAGE DEFINITIONS
Table 11: Maintenance Page Definitions
Maintenance -> Web Access
End User Password
Set new password for web GUI access as User. This field is case sensitive.
Confirm Password
Enter the new User password again to confirm.
Current Admin Password
The current admin password is required for setting a new admin password.
Admin Password
Set new password for web GUI access as Admin. This field is case sensitive.
Confirm Password
Enter the new Admin password again to confirm.
Maintenance -> Upgrade and Provisioning
Specifies how firmware upgrading and provisioning request to be sent:
Firmware Upgrade and
Always Check for New Firmware, Check New Firmware only when F/W
Provisioning
pre/suffix changes, Always Skip the Firmware Check. The default setting is
“Always Check for New Firmware”.
XML Config File
The password for encrypting the XML configuration file using OpenSSL. This
Password
is required for the phone to decrypt the encrypted XML configuration file.
HTTP/HTTPS User
Name
The user name for the HTTP/HTTPS server.
HTTP/HTTPS Password
The password for the HTTP/HTTPS server.
Always Authenticate
Only applies to HTTP/HTTPS. If enabled, the phone will send credentials
Before Challenge
before being challenged by the server. The default setting is “No”.
Upgrade Via
Firmware Server Path
Config Server Path
Allows users to choose the firmware upgrade method: TFTP, HTTP or
HTTPS. The default setting is “HTTP”.
Defines the server path for the firmware server. It could be different from the
configuration server for provisioning.
Defines the server path for provisioning. It could be different from the
firmware server for upgrading.
Enables your ITSP to lock firmware updates. If configured, only the firmware
Firmware File Prefix
with the matching encrypted prefix will be downloaded and flashed into the
phone.
Firmware File Postfix
Enables your ITSP to lock firmware updates. If configured, only the firmware
GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.4.16
GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE
Page 57 of 81