Download Manual - Astronics Test Systems

1261B User Manual
Publication No. 980766 Rev. B
Only the failing supplies will be shown when this error
occurs. This message may be returned if the *TST?
command returns a value of -3.
Fan Speed Sensors: Fan#1 Fan#2 Fan#3
This error is returned when the fan speed monitor
sensors for one or more of the fans has failed. All three
fans are shown in this example. Only the failing fan(s)
will be shown when this error occurs. This message may
be returned if the *TST? command returns a value of -3.
Ambient Temperature Sensor
This error is returned when the ambient temperature
sensor has failed. The message may be returned if the
*TST? command returns a value of -3.
Slot Temperature Sensors (Slots): 0 1 2 3 4 5 6 7 8 9 10 11 12
This error is returned when one or more of the slot
temperature sensors has failed. This example shows all
thirteen of the slot temperature sensors. Only the failing
sensors will be shown when this error occurs. This
message may be returned if the *TST? command returns
a value of -3.
Microcontroller P.I.T failed
This error is returned when the EMS’s Programmable
Interrupt Timer test has failed. This message will be
returned if the *TST? command returns a value of -4.
EEPROM header corrupt (XXXXXXXX)
This error is returned when the header (first 4 bytes) of
the EEPROM do not match the expected fixed pattern of
AAAA5555 hexadecimal. The actual value read from the
EEPROM is shown as 8 hexadecimal digits enclosed in
parentheses. This error may be returned if the *TST?
command returns a value of -5.
EEPROM Alarm Data Corrupt (Address XXXX)
This error is returned when one of the alarm time-stamps
in the EEPROM does not have a valid checksum. This
indicates that the particular time stamp is corrupted. The
address within the 8K EEPROM is shown as four
hexadecimal digits. This error may be returned if the
*TST? command returns a value of -5.
Using The Enhanced Monitoring System 4-48
Astronics Test Systems