Download Datasheets - Jameco Electronics

Transcript
Page 318 · Understanding Signals with the PropScope
 Position the purple vertical B time cursor so that it intersects with the CH1 trace
as it crosses the CH1 0 V ground line.
 Check the ∆ measurement in the Cursors display, and compare to the calculated
78.5 μs value.
Figure 8-41: Phase Output/Input Comparison
Align green A
time cursor with
DAC signal’s
zero crossing.
Align purple B
time cursor with
CH1 signal’s
zero crossing.
Get the
resulting ∆
time
measurement
from this field
in Cursor
display.