Download here. - Telonics Pro Audio

MECHANICAL DATA
Chassis Material
Aluminum
Finish
Hard Anodized
Front & Rear Panel Markings
Laser Etched
Panel
Meets industry standard specifications (EIA-310-D,
CEA-310-E, IEC 60297-3-100, and DIN 41494-7).
Panel Thickness
0.13 in. (0.33 cm)
Panel Height
1.70 in.(4.32 cm) typical
1.75 in. (4.45 cm) max
Panel Width
19.0 in. (48.3 cm) max
Internal chassis/cabinet width
(including screws)
17.32 in. (44 cm)
Internal chassis/cabinet height
1.73 in (4.39 cm) typical
1.75 in. (4.45 cm) max
Internal chassis/cabinet depth
5.25 in. (13.3 cm)
Total protrusion of jacks beyond
rear chassis (max)
0.235 in. (0.597 cm)
Total protrusion of knobs beyond
front panel
0.72 in. (1.83 cm) max
Total weight
2.95 lb. (1.338 kg)
ELECTRICAL DATA
Input Voltage
24VDC center pin is positive.
Input Power
11 Watts maximum.
Approved Power sources
115VAC to 24VDC wall wart supplied, International
100VAC-240VAC to 24VDC wall warts available,
Telonics PA-4100/PA-100 mono power amp, and
Telonics PA-4200/PA-200 stereo power amp
System Audio Gain
59 dB
Telonics PRE-200 Preamplifier
PB-008684 Rev A
13