Download URHE_CF

High efficiency heat recovery unit with cooling circuit - URHE_CF -
MSS, MBCH, MBCX assembly
Accessories MBCH, MBCX and MSS are
equipped with:
- “L” supporting brackets;
- M6 screws to draw close the accessory
to unit;
- for MBCX only: electrical box put outside the accessory;
-for MBCH only: electrical cables for
connection between three way valve
servocontrol (230V, ON/OFF running)
and electrical box and between electrical box and unit electrical panel;
- for MBCX only: electrical cables for
connection between coil and electrical
box and between electrical box and
unit electrical panel (electrical cables
for coil electrical supply and protection differential magnetic switch are not
supplied).
For accessories installation on the ceiling and their connection to the unit
please refer to the following instructions:
- collocate the support brackets on the
wall following the instructions at page
24;
Selection, installation, use and maintenance manual
21
- draw close to the accessory MBCH,
MBCX, MSS to unit;
- fix with screws the accessory to unit
prepared with threaded hexagonal
inserts;
- connect electrical cables coming from
the accessory electrical box to the unit
electrical panel (please refer to electrical schemes equipped with the unit).
GB