Download Verigene RP Flex Package Insert

Customer Service or Technical Service:
In the U.S. Phone: 1-888-837-4436 (toll free)
OR E-Mail: [email protected]
Outside the U.S.: Contact your local Nanosphere distributor
i www.e-labeling.eu/NAN024
VERIGENE DAILY MAINTENANCE
A. Work Area Preparation
Each day of testing and before and after sample preparation, prepare the testing work area by sanitizing the
BSC, countertops, vortex mixers, pipettes, and any other equipment used for sample processing with a lintfree decontaminating wipe.
B. Verigene System Cleaning
Prior to the start of testing each day, and after completing a run, perform the following steps for each
instrument used for testing.
While wearing fresh gloves, use a lint-free decontaminating wipe to thoroughly wipe the Drawer Assembly of
the Verigene Processor SP as well as the OPEN/CLOSE button on the front of the Processor SP. Do not use
the same lint-free decontaminating wipe to clean more than one Processor SP.
For the Verigene Reader, use a decontaminating wipe to clean the user Touchscreen, Barcode Scanner and
the door of the Analysis Compartment.
Please refer to the Verigene System User’s Manual for additional details on routine and daily maintenance.
Page 6 of 59
®
Verigene Respiratory Pathogens Flex Nucleic Acid Test (RP Flex)
027-00050-01, Rev. B; September 2015