Download ECM-PNV

ECM-PNV
3.6.4.1 Boot settings configuration
Use Boot Settings Configuration menu to configure advanced boot options.
Item
Quick Boot [Enabled]
Quiet Boot [Disabled]
Options
Disabled,
Enabled (DEFAULT)
Disabled (DEFAULT)
Enabled
Description
This item allows BIOS to skip certain tests
while booting. This will decrease the time
needed to boot the system.
If set to Disabled, the BIOS displays normal
POST messages. If Enabled, an OEM Logo is
shown instead of POST messages.
AddOn ROM Display Mode
Force BIOS (DEFAULT)
[Force BIOS]
Keep Current
memory) messages to be displayed.
On (DEFAULT)
This option allows the number Lock setting to
Bootup Num-Lock [On]
Off
Auto (DEFAULT)
This option allows add-on ROM (read-only
be modified during boot up.
This interface utilizes a bidirectional serial
Disabled,
protocol to communicate with the computer's
Enabled
auxiliary device controller
Wait For “F1” If Error
Disabled,
When set to enable, the system waits for the
[Enabled]
Enabled (DEFAULT)
Hit “DEL” Message Display
Disabled,
[Enabled]
Enabled (DEFAULT)
PS/2 Mouse support [Auto]
Interrupt 19 capture
[Disabled]
62 ECM-PNV User’s Manual
Disabled
(DEFAULT)
Enabled
F1 key to be pressed when error occurs.
This BIOS feature allows you to control the
display of the Hit “DEL” to enter setup
message during memory initialization.
This item allows options for ROMs to trap
interrupt 19.