Download Troubleshooting Chart, continued

Transcript
Operator's Guide
Cleaning the LSU Cover Glass
6-21
PB0-W1
Cleaning Fuser Heat Roller
Stains or streaks in print may indicate a dirty fuser heat roller. A dirty or
damaged fuser heat roller may leave vertically spaced blotches
approximately three inches apart on the printout.
Note:
The best way to keep the fuser roller clean is to frequently
replace the felt cleaning pad. Most other attempts to clean the
fuser—specifically, the fuser heat roller—are not particularly
effective, especially if toner has been allowed to bake itself
onto the surface of the fuser heat roller over a long period of
time. Frequent replacement of the felt cleaning pad helps
prevent baked-on toner.
Caution ! NEVER operate the printer without a felt cleaning pad.