Download Troubleshooting Chart, continued
Transcript
Operator's Guide Cleaning the LSU Cover Glass 6-21 PB0-W1 Cleaning Fuser Heat Roller Stains or streaks in print may indicate a dirty fuser heat roller. A dirty or damaged fuser heat roller may leave vertically spaced blotches approximately three inches apart on the printout. Note: The best way to keep the fuser roller clean is to frequently replace the felt cleaning pad. Most other attempts to clean the fuser—specifically, the fuser heat roller—are not particularly effective, especially if toner has been allowed to bake itself onto the surface of the fuser heat roller over a long period of time. Frequent replacement of the felt cleaning pad helps prevent baked-on toner. Caution ! NEVER operate the printer without a felt cleaning pad.