Download Troubleshooting Chart, continued

Operator’s Guide
7-13
Troubleshooting Chart, continued
Problem
Probable Cause
Solution
6. Worn Drum
6. If a drum has been used
extensively to print narrow
forms, it may show when media
is switched to wide forms. Print
may seem lighter from the drum
area used in printing the narrow
forms.
7. Piece of Paper or Debris
Caught in Developer
7. Check the developer as you
would for a jam (Page 7-51), but
instead move the toner-coated
roller for a short distance in the
opposite direction to retrieve any
paper caught in the developer.
8. Dirty or Obscured LSU
Cover Glass
8. Check and clean LSU cover
glass.
9. Bad Developer
9. Replace developer.
Print Quality, continued
No Print in Narrow
Vertical Strip (Continued)